Kanger Single Replacement Coils
SKU:
A$2.00
A$2.00 - A$8.50
per item
All of the H Series clearomisers and the ProTank 2 use the same replacement coils. They simply screw out of the base plate and the new one screws into place.
The coils come in two different ohm levels : 1.5 ohms or 2.2 ohms to allow you to customise your vapor production.
The higher the ohm rating, the more vapor produced [and the faster your battery drains : it uses more power to heat the coil to the new setting].
The coils come in two different ohm levels : 1.5 ohms or 2.2 ohms to allow you to customise your vapor production.
The higher the ohm rating, the more vapor produced [and the faster your battery drains : it uses more power to heat the coil to the new setting].
Coil Tips :
* Sub Ohm coils are favoured by direct to lung vapers
* Std Ohm coils are favoured by mouth to lung vapers
* Lower Ohm coils will use more power, draining the battery faster
* Lower Ohm coils will also generate more heat in the unit itself
* If you notice the unit is heating up during operation, this is perfectly normal. Extra heat generated during operation is passed out via the body of the battery, effectively using it as a 'heat sink'. The batteries have overheating and short circuit protection functions and will stop working if they do actually overheat beyond the normal working range. Should this occur, you will need to allow the unit to cool completely before operating again
* 0.5 Ohms are indicated as the best resistance for good vapour production and life span overall at a low to medium power level, and is likely the most popular ohm rating for a variety of coil types and styles
* Sub Ohm coils are favoured by direct to lung vapers
* Std Ohm coils are favoured by mouth to lung vapers
* Lower Ohm coils will use more power, draining the battery faster
* Lower Ohm coils will also generate more heat in the unit itself
* If you notice the unit is heating up during operation, this is perfectly normal. Extra heat generated during operation is passed out via the body of the battery, effectively using it as a 'heat sink'. The batteries have overheating and short circuit protection functions and will stop working if they do actually overheat beyond the normal working range. Should this occur, you will need to allow the unit to cool completely before operating again
* 0.5 Ohms are indicated as the best resistance for good vapour production and life span overall at a low to medium power level, and is likely the most popular ohm rating for a variety of coil types and styles
