- THE SHOP
- >
- Replacement Parts
- >
- USB Chargers and Adapters
- >
- USB Screw in Charger
USB Screw in Charger
SKU:
USBCHGBLK
A$7.00
A$7.00
Unavailable
per item
We've just found a new charger cable to add to our family of charger cables. This one's perfect for using in the car, cause it's only got a short cable and your battery won't end up rolling off the dash or console and ending up under your feet or worse still, out the window! Aaarrrrgggggghhhhhh!
Remember, only use the dedicated USB screw in charger supplied to charge your e-cig. Not only do you void your warranty by using another cable, but you may end up burning out your e-cig, the charger cable or both! Worst case scenario would be that you end up setting fire to your home with it . . . not a good look . . .
Keep in mind it's best practice is to never put your e-cig on to charge and then go out, leaving it plugged in and charging [or any other device for that matter]. If it does happen to short out and you're not around to notice, our worst case scenario from above becomes more of a real possibility. Only charge your e-cig [and other stuff] while you're there to keep an eye on it.
For the best performance when charging through your computer, use a high-speed port [2.0 or higher]. Having said that, I've found that the battery seems to recharge faster if I plug the charger cable into a wall plug [or the 3.0 USB port on my computer].
Don't forget to turn your e-cig's voltage or power adjustment up to maximum before you put your e-cig on to charge and remember to turn it back down to your normal setting before you start using your e-cig again . . . the results if you forget to turn the voltage or power back down again can be literally mind blowing . . . or at the very least, head spinning.
The USB screw in charger can be used with any universal USB wall plug adaptor or car charger.
The USB screw in charger will work with all 510, 510-T, eG0 and eGo-T Batteries.
Properties :
Input : DC 5v ~ 500mA
Output : DC 4.2v ~ 420mA
Remember, only use the dedicated USB screw in charger supplied to charge your e-cig. Not only do you void your warranty by using another cable, but you may end up burning out your e-cig, the charger cable or both! Worst case scenario would be that you end up setting fire to your home with it . . . not a good look . . .
Keep in mind it's best practice is to never put your e-cig on to charge and then go out, leaving it plugged in and charging [or any other device for that matter]. If it does happen to short out and you're not around to notice, our worst case scenario from above becomes more of a real possibility. Only charge your e-cig [and other stuff] while you're there to keep an eye on it.
For the best performance when charging through your computer, use a high-speed port [2.0 or higher]. Having said that, I've found that the battery seems to recharge faster if I plug the charger cable into a wall plug [or the 3.0 USB port on my computer].
Don't forget to turn your e-cig's voltage or power adjustment up to maximum before you put your e-cig on to charge and remember to turn it back down to your normal setting before you start using your e-cig again . . . the results if you forget to turn the voltage or power back down again can be literally mind blowing . . . or at the very least, head spinning.
The USB screw in charger can be used with any universal USB wall plug adaptor or car charger.
The USB screw in charger will work with all 510, 510-T, eG0 and eGo-T Batteries.
Properties :
Input : DC 5v ~ 500mA
Output : DC 4.2v ~ 420mA
3 available